AC and Furnace Filters
Custom Made Just For You!
Look No Further.. We Will Custom Make Filters For Your Heating and Air
Conditioning System.
Stop trying to find a filter that fits your AC or Furnace. Let us take
care of it for you. Just pick a filter style and we will make it to exactly fit
you system.
Electrostatic Air Filter
Our
electrostatic air filter is a permanent air
filter that replaces your existing fiberglass or pleated air filter. An
electrostatic filter is a permanent, cost effective way to significantly improve
the quality of your indoor air.
The electrostatic filters are made from special
materials that develop their own safe electrostatic charge as air is drawn
through the filter by your air-conditioner, heater or furnace - This charge
attracts contaminants like a magnet. Electrostatic filters
do not require any power to operate and will
replace any existing Air-conditioning/Heating filter without modification.
We recommend cleaning your
electrostatic filter at every month depending on how quick the dirt and dust
build up is. The cleaning process is very simple. Remove the filter, vacuum both
sides and rinse water. For tough dirt or grease you may have to wash with a mild
household detergent (M1 House
Wash). Once your electrostatic air filter is clean let it dry and then
put it back in your system.
-
Specifically designed for residential as well as commercial applications
-
Embedded with VIBAX MI-50,
an anti-microbial which effectively limits and controls bacteria, mold and
mildew, and helps to reduce odor.
-
The unique combination of Polypro with polyurethane foam media attract and hold airborne
pollutants
-
The filter frame is rugged aluminum - it will never
corrode or rust.
-
Epoxy coated metal retainers and internal stiffeners increase stability
-
Double rivet construction
-
Drain hole for easy and through cleaning
-
High efficiency ratings as well as increased holding capacity enable quality filtering ability
(ASHRAE 52-76)
-
A regular maintenance schedule is essential to restore pressure drop to its low designed status and help reduce energy costs
-
Available in ˝", 1" thickness
-
Custom sizes up to 1200 sq. in. available.
-
Lifetime factory warranty against defects.
NOTE: Please state the filter dimensions you need in
the comments section of the order form.
| AF - Up to 24" X 30" |
$100.00 |
 |
| AF-L - Over 24" X 30" |
$125.00 |
 |
Electrostatic Pleated Air Filters
M R8
filters are made with Intrepid® filtration media from
Kimberly Clark: a high loft electrostatically charged performance media that is
100% synthetic, and thermally bonded with no chemical binders. MR8 air filter
has a uniform pleat shape that holds more dirt, dust, pollen and mold spores and
is designed to offer better filtration performance than traditional cotton/poly
filter media for cleaner air, higher energy efficiency, and longer filter life.
A consistent pleat shape produces optimum performance and efficiency. The media
is bonded to a 30 gauge galvanized, corrosion resistant, expanded metal support
grid. 12 filters per case
-
Merv 8 Rated (Minimum Efficiency Reporting
Value) per ASHRAE 52.2
-
30%-35% efficiency rating
-
Electrostatically charged high loft media
-
Lasts up to 90 days under normal conditions
-
Moisture and bacteria resistant
-
100% white synthetic fiber media
electrostatic enhanced
-
Filters Out 90% of mold spores and pet
dander
-
Meets the American Lung Association® Health
House® Indoor Air Quality guidelines
-
Strong, rugged double strength frame
-
Low Initial resistance to air flow
-
Durable, non-warping metal web backing
-
Extended dust holding capacity
NOTE: Please state the filter dimensions
you need in the comments section of the order form. All filters over 25" x 30"
are considered a double filter.
| MR8 - Electrostatic Pleated Filter |
$110.00 Per Case |
 |
Change Pad Frame Filter Systems
Change Pad Frame Filter System incorporates a permanent rugged aluminum
retaining frame. Pads are made from Dry Tack Polyester and contain an
anti-microbial agent which is effective in limiting mold and mildew growth.
Comes with frame and 12 pads.
Potential relief for allergy and asthma sufferers
Because Absolute Change Pad filters are effective in trapping pollen, mold,
bacteria, dust, pet dander and many other airborne contaminants, they can
potentially reduce or eliminate allergy and asthma symptoms. Change Pad
filters are up to 30 times more effective at removing airborne contaminants than
those cheap "blue" disposables air filters you buy at the grocery store.
An epoxy coated metal retainer supports the media
on the air leaving side
Custom-fit pads are available packaged from 1-12
Initial resistance of a mere
0.14 w.g. at an airflow of 1200 CFM
90% peak arrestance which
means that up to 90% of contaminants were trapped during testing.
Dust holding 320 grams/dust spot 20%
NOTE: Please state the filter dimensions
you need in the comments section of the order form.
| CPF - Up to 24" X 30" |
$79.00 |
 |
| CPF-L - Over 24" X 30" |
$89.00 |
 |
Replacement Pads
NOTE: Please state the filter dimensions you need in
the comments section of the order form.
| CP - Up to 24" X 30" |
$5.50 |
 |
| CP-L - Over 24" X 30" |
$6.75 |
 |
800 771-ACHOO (2246)
Site Map ~
Allergy
Control Products ~
Articles ~ HEPA
Air
Cleaners ~
Asthma Care ~
Mattress Encasings
~ Dust Mite Proof Bedding ~
Cleaning Products ~
Dust Control ~
Laundry Care ~
Learning Center
~
Mold ~
More Info ~
Pet Care
~ Test Kits ~
Toys ~
Skin Care ~Vacuum
Cleaners ~
Home
|